(approx) 20 Minutes
Simple installation for anyone.
$71.77 (set)FREE Shipping on orders over $75
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
Hey, guys. Joe from ExtremeTerrain, and today I'm going to be reviewing and installing the Husky Custom Molded Front and Rear Mud Guards, fitting all '16 and newer Tacomas with OE Fender Flares. These mud guards are going to be perfect for any Tacoma owner out there who's worried about keeping their truck clean, protecting their paint from any road debris with a mod that is easy to install and budget-friendly. So we've all been there as people who love our Tacomas. We clean and polish our trucks. As soon as we get them out of the car wash, what's the very first spot that gets dirty? Right behind each of the tires. The Husky mud guards are going to help not only keep that area clean, but protect them from any rock chips as well, as this is one of the most common spots for rock chips on the truck, and if left unattended, will lead to rust. So what's the best way to take care of that? It's to completely prevent that in the first place. These mud guards are constructed out of a textured black thermoplastic that is going to be able to withstand an impact without cracking or shattering. As you could see, they match the black accents on our '16 Tacoma perfectly, and look like they could have come on the truck from the factory. Today we'll be working on the full set of four mudguards. That's gonna come in at around the $80 price point, and that's a fair price to pay as well. It's right in the middle ground in terms of price for a set of mudguards like this one, and they even beat out the WeatherTechs by just a little bit. As far as the install goes, there's no drilling or modification required to get these on your truck. We're going to be using all factory mounting positions and hardware as well. So this gets an easy one out of three wrenches on our difficulty meter. Should only take you about 20 minutes to get these on your Tacoma. So without any further ado, let me show you how it's done.The only tools you will need for this install are going to be some soapy water or isopropyl alcohol, a clean microfiber rag, 10-millimeter socket, and a ratchet. So we're going to start our install at the passenger side rear, and now we are going to be reusing our factory hardware. So we're gonna get that out of the way first. And that is these three 10-millimeter bolts right here along this body panel. And there's a body clip right here on the fender liner as well. Now for this body clip right here, what you're going to do is reach in over the tailpipe. Now you want to make sure the vehicle is cold, or this will burn you a little bit, but reach over the tailpipe and then press down on the corners of this square clip, and it should come right out. So before we go and install our mudguard, which is going to be as easy as the reverse of what we just did, we're actually going to hit the area with some soapy water and give it a good wipe down to make sure it's nice and clean. But also, Husky gives you some 3M-backed adhesive paint protection strips that we're going to apply on there as well. So now we have our paint protection applied. We're gonna grab the mudguard labeled "PS rear," and install it using that factory hardware. Then we're going to reinstall those three 10-millimeter bolts and that body clip. The front is going to be the same process, except there's no body clip up here. So again, we're using a 10-millimeter socket, and reusing that factory 10-millimeter hardware. So there's those two bolts up top, and there's one more 10-millimeter we'll have to remove underneath. So now we're going to wipe down the area with some soapy water. If you have isopropyl alcohol, that would probably work even better. And then apply our paint protection. So now what I'm gonna do is just spray some of that soapy water on there in order to float our paint protection. Then I'm basically going to use my hand to squeegee out that water from underneath, and lock it in place. So now we can get our mudguard in place, this one's labeled "PS front," using that factory 10-millimeter hardware.And that is going to do it for my review and install of the Husky Custom Molded Front and Rear Mud Guards, fitting all '16 and newer Tacomas with OE Fender Flares. Thank you for watching. I'm Joe, and for all things Tacoma, keep it right here at extremeterrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Mud Protection with Style. Frequently taking your 2016-2022 Tacoma out off-roading can be tough on the finish of your fender and side panels due to the thrown-off mud and debris that comes with the open trail. This is especially true if you’ve upgraded to larger tires. Prevent this by installing a set of Husky Custom Molded Front & Rear Mud Guards on your Tacoma. These mud guards’ wide design makes short work of rock chips, pebbles, and other common hazards both on and off-road. Additionally, its form-fitting style looks much sleeker compared to your stock guards.
Manufactured from Tough Thermoplastic Compound. Husky Custom Molded Front & Rear Mud Guards are manufactured from a specialized thermoplastic compound that’s both tough and flexible. These mud guards feature a wider profile and offer excellent protection from thrown-off debris. Lastly, these mud guards are engineered to withstand a full range of weather conditions without cracking.
Easy Install Procedure. Installing Husky Custom Molded Front & Rear Mud Guards is a relatively easy procedure that doesn’t require any modifications to your truck. These guards mount on existing bolt holes on your Tacoma.
Backed by a Limited Lifetime Warranty. Husky Custom Molded Front & Rear Mud Guards are backed by a limited lifetime warranty against workmanship defects. Please visit the manufacturer’s website for further details.
Application. Husky Custom Molded Front & Rear Mud Guards fit all 2016 to 2022 Toyota Tacoma models with OE fender flares.
Husky Liners 56946
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 20 Minutes
Simple installation for anyone.
What's in the Box
10 More Questions