(approx) 1 Hour
Simple installation for anyone.
- How to Install Pypes High Ground Clearance Cat-Back Exhaust (07-18 Jeep Wrangler JK) on your Jeep Wrangler
$294.51 (kit)FREE Shipping
Saved - View your saved items
We're sorry. We couldn't save this product at this time.
I'm Ryan from ExtremeTerrain.com and this is my review of the Pypes High Clearance Catback Exhaust, fitting all 2007 to 2016 JKs. This exhaust will fit on both your two-door and your four-door JK, however on a two-door you will have to do a little bit more trimming.Most catback exhaust systems are designed to provide you with a lower and louder exhaust note, especially one like this that removes your factory resonator and muffler in place of this much smaller muffler. Now the sound and the volume that you get out of your engine is very much going to be dependent on what year your Jeep is, and whether you have the 3.8-liter or the 3.6-liter motor. A system like this is specifically designed to be high clearance, so it gets rid of all that factory piping and muffler and tucks everything up out of the way of trail obstacles. Now this system is a little bit less expensive than some other high clearance systems on the market, and when you take a look at it, it is very utilitarian. You can see a lot of the marks on the piping from the benders. There's no fancy polished tip or anything like that, but it definitely gets the job done and it does it at a lower price than a lot of the other systems out there.This system is built out of two and a half inch diameter 304 stainless, which means the material is going to be fairly resistant to rust and corrosion, but you can expect to see a little bit of surface rust. It's not the highest quality material out there, but it's also not going to be low quality and completely rust out on you. But this is one way that Pypes is able to keep the cost of this system down a little bit.This system includes all of the hangers and clamps that you need to get it installed in the Jeep. And like I said before, you will have to do a little bit of trimming of the mid pipe, whether you're installing it on a two-door or a four-door JK. However, those of you with the two-door JK will have to do a little bit more cutting. Those of you who have done a lot of exhaust work in the past know that things can get rusty, and removing your factory system can be the most difficult part of an installation. So I would definitely recommend soaking all of the bolts, clamps, and hangers well in advance of getting started with a good penetrating oil to give you the best chance of everything coming apart.Pypes gives you very clear instructions on how to get this system installed on the Jeep, and I would recommend following those instructions carefully because it's gonna to give you the best chance of everything lining up and fitting the first time. Once you have that factory system unbolted and out of the way, you'll actually start by hanging the tailpipe. Then, install the muffler, and then take a measurement or probably three or four of them to make sure that you cut the mid pipe to the exact length that you need it. Once the pipe is cut down, you can install it in the system using all of the included clamps, and all of those factory hangers will hold everything into place. The system does include one additional hanger to help hold up some of the additional weight of your new system.The whole installation could take you as little as an hour if your factory exhaust system is rust-free, or a little bit longer if you have to fight with it a bit. You won't need any specialty tools to get this installed, but having a pry bar handy to get rid of some of those rubber hangers is definitely useful. Now, I said before that this system is sort of no frills. As I mentioned, you can see some of the bend marks on the pipe, it doesn't come with a fancy polished tip, and it is 304 stainless instead of a 409 or a different grade. But all of those things keep the price of this system down a little bit, and in my opinion, this is a really fair price for what you get. It tucks everything up out of the way and gives your exhaust a really nice tone all for a really fair price.So, whether you're just looking to change up the tone of your exhaust and get some more volume out of it, or you're somebody who goes off road and either already smashed your muffler or exhaust tip, or you think you might, this is a really nice system that's not only gonna give you the sound and volume that you're after, but also tuck everything up out of the way. And the best part about it is it does it all at a really reasonable cost.So that's my review of the Pypes High Clearance Catback Exhaust, fitting all 2007 to 2016 JKs that you can find it right here at ExtremeTerrain.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Function. Achieve High ground Clearance using the Pypes Cat-Back Exhaust System. It ensures high performance gain in torque and horsepower, while delivering a deep exhaust note.
Design. The muffler is relocated to the forward of the rear, making this exhaust a perfect choice for off-road use. This Jeep Wrangler exhaust system has a 2.5-inch diameter mandrel-bent 304 stainless steel tubing that lasts long. The polished stainless steel muffler adds to the strength.
Setup. This catback exhaust system ensures simple bolt-on installation, eliminating the need for drilling.
Fitment. It is designed for 2007-2018 Jeep Wrangler JKs, requiring trimming of the Mid Pipe for 2-door models.
Fitment: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
(approx) 1 Hour
Simple installation for anyone.
10 More Questions