Talk to a Gladiator Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

Oracle Flush Mount LED Tail Lights; Black Housing; Red Clear Lens (20-24 Jeep Gladiator JT)

Item JG15477
ExtremeTerrain no longer carries the Oracle Flush Mount LED Tail Lights; Black Housing; Red Clear Lens (20-24 Jeep Gladiator JT). Please check out 2020-2024 Jeep Gladiator Tail Lights for an updated selection.
Verify parts fit and get product recommendations.
Gladiator Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Videos

    Merideth: Hey, guys. So, today we're checking out the Oracle Flush Mount LED Tail Lights with the Black Housing and the clear lens fitting all 2020 and newer JT Gladiators. Now, these will be right up your alley if you're looking for a unique tail light option that will not only add some modernized and sleek styling to your JT but also increase your lighting performance at the same time. These will also be super low profile, so if you're frequently taking your Jeep off-road, and wanna minimize trail damage, these will do just the trick.Now, as it says in the name, this will feature a flush design that will stay out of the way of branches and obstacles on the trail, and add a pretty custom look to the rear end of the Jeep. Now, the outer portion of the tail light here will have a red C-shaped LED light bar as the perimeter lighting, which will be your brake light and your running light. But the inside here, it's gonna have multiple bright white LEDs for the reverse light. And it's not only gonna make you a lot more noticeable when driving around on the street but offer some better visibility when backing up.Each light will have a solid plastic housing with an OE textured finish to match any other OE accessories that you still have on your JT. And this will also have a durable clear lens on the top, protecting the lighting underneath. Now, each light will also feature 12 high-powered LED reverse lights, again, offering brighter and cleaner lighting when backing up. Now, this set will also be compatible with factory cross-traffic sensors, and offer enhanced reverse functions all while being plug-and-play.This set will come in at roughly $400, putting these on a more premium price point compared to other choices in the category. Now, they will say is that these are incredibly unique in the design, considering that these will be flush mounted, and stand out from a lot of other choices. Now, other options will usually have a traditional square design with different LED configurations on the inside. Now, I think if you want your JT to stand out from the rest when it comes to the lighting on your gladiator, then this is the kit for you.Install will be very straightforward at a one out of three wrenches on the difficulty meter, taking you about an hour to get the job done with some basic hand tools. Now, at this point, we can head over to the shop, and check out a detailed breakdown of the install step by step. So, that's gonna wrap it up for me. Let's go ahead and jump into it.Man: Tools required for this install include a ratchet and an 8-millimeter socket. What's up, guys? Today we're gonna be installing a set of tail lights on our Gladiator. So, let's get started. So, our first step is to pop down our tailgate, and that'll expose our two 8-millimeter screws that hold our tail light in place. So, we can take an 8-millimeter socket to take these screws out, and then we can just pop our tail light out and disconnect our wire and harness.And now with our two screws removed, we can just pull straight back, and once we have our taillight out of place, we can pull down on the red tab on our harness, and then press the black tab. Let's pop that out, and then we can repeat that same process on the other side. Now, before we install our tail lights, it's important to note that depending on the model of your Gladiator, you might have an extra connector on the new set of tail lights. Now, this connector is for the blind spot sensors, so you can swap over your sensors into this tail light, and then use this connector if you have that. We don't have that, so we're just gonna plug in our normal harness and install our tail lights.So, now to install our tail lights, first, we're gonna mount our resistor. So, this has a piece of double-sided tape on the back, so we can peel off that backing, and then stick it down out of the way. And then we'll take our main harness and connect that, and push our red tab down to lock. And then we can slide our tail light into place. And now with our tail light in place, we can reinstall our two 8-millimeter screws.And then once we're done installing our tail light on this side, we can do the same thing on the other side. So, that'll wrap up this review and install of the Oracle Flush Mount LED Tail Lights with Black Housing and Clear Lens for your 2020 and newer Gladiator JT. Thank you for watching, and for all things gladiator, keep it right here at extremeterrain.com.

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Oracle Flush Mount LED Tail Lights
    • High-Quality Material
    • Durable Construction
    • Direct Replacement
    • LED Bulb Type
    • Black Plastic Back Housing
    • Polycarbonate Clear Lens
    • Limited Lifetime Warranty
    • Fits All 2020-2024 Jeep Gladiator JT Models

    Description

    Reliable Illumination. This Oracle Flush Mount LED Tail Lights to provide a constant and ample amount of light that is very important especially when driving at night or in inclement weather. This product is an improvement from the stock halogen type of headlight. Provides an even spread of the light beam.

    Excellent Build Quality. This product was made using high-quality materials to meet quality standards and provide you a constant performance under an intense level of abuse that you might encounter on a daily basis. Whether it's the regular drive to your local shops or driving through an off-road track, this product can withstand it all for years to come.

    Installation. These headlights don't require modifications to your vehicle and to this product itself. It features a direct replacement for your stock taiil lights.

    Warranty. This Product is backed by a Limited Lifetime Warranty.

    Application. The Oracle Flush Mount LED Tail Lights fits 2020-2024 Jeep Gladiator JT models. Designed to work with North American Model Gladiators. For European or Export model Jeeps it is recommended to add Part# 4512-005 as an additional amber light for signaling.

    Technical Note. Factory halogen equipped Jeeps may require a small resistor to be added if the reverse lights shut off after extended use. This can also be easily corrected with a programmer such as a J-scan or Tazer.

    NOTE: Factory halogen equipped Jeeps may experience issues such as reverse lights strobing or shutting down. If this occurs, please be sure to connect the included resistors per the included diagram.

    NOTE: Some Halogen Equipped Gladiators may require the use of a programmer to prevent Park Lights from shutting down.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (2) Tail light Assembly
    • Driver Side and Passenger Side
    • Installation Hardware
    4.9

    Customer Reviews (75)

      Questions & Answers

      10 More Questions