StickerFab Lower Door Protection; 3D Carbon Black (21-24 Bronco 4-Door)

So the first time we took the doors off the Bronco we heard tons of rocks getting thrown at it by those beefy MT tires. Some light off-roading / mudding showed us where it gets sprayed the most as well.

We decided to add a little protection and styling at the same time. This kit is enough to cover the lower door area of one full vehicle.

From the factory we also have some paint defects in this area which we will be covering up. It will also provide small amounts of protection when taking the doors off and putting them inside the storage bags.

COLORS
We're starting off offering 4 different types of materials. All of these materials are sourced in the US and are a premium choice for your vehicle.

Matte black is one of the easiest colors to install in general. It stretches and responds to heat very well.

The gloss black we chose has air egress channels and that is why it is a little more expensive than standard colors. Air egress channels assist in providing a path for air to escape during installation (less bubbles). Some cost is also due to the fact that it is cast versus calendared.

General Formulations 3D carbon wrap also has air egress channels and a textured, dark appearance. We've used it for tons of accents. To clean, use 303 Aerospace Protectant. It'll look great! Don't use any type of wax. This is the thickest material and offers the highest durability.

Clear Oracal ORAGUARD 270G stone protection offers a transparent solution to paint protection. It is 6 mil in thickness.

All options have high outdoor durability ratings.

NOTE: 2 sets are sold at a reduced price. Keep it as a backup or in case your first install proves to be difficult.

Fitment:

• 2021 Ford Bronco
• 2022 Ford Bronco
• 2023 Ford Bronco
• 2024 Ford Bronco

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov