RockJock Antirock Aluminum Sway Bar Arms; 18-Inches (97-06 Jeep Wrangler TJ)Find parts that fit my vehicle

For those looking for maximum cool factor for their off-road or rock crawling rig, RockJock’s CNC machined 6061T6 aluminum Antirock Sway Bar Arms have got you covered!
Available in various lengths and shapes to suite different builds and applications, the billet aluminum construction provides high-end, custom look that adds a nice bit of shiny detail to any build.
These specific arms are 18 in. long from tip to tip, 3/4 in. thick at the splines and 3/8 in. thick the balance of the length of the arm to provide extra clearance in tight spots (such as steering gear chassis bolts in TJ/LJ applications). At the mounting end, you’ll find our standard 25 spline that fits all common Antirock torsion bars as well as the vertical pinch bolt hole for attaching the arm to the bar. At the opposite end, you’ll find five 1/2 in. Sway Bar End Link mounting holes that allow you to adjust end link mounting position to increase or decrease leverage on the torsion bar.
Arms are sold as a pair only and are finished in clear anodize.


Arms Fit:

Universal Application (in 25 spline torsion bar applications)
Included in CE-9900A TJ Wrangler front Antirock Kits
Included in CE-9900A TJ Wrangler Unlimited (LJ) front Antirock Kits

Kit Includes:

(1) Pair of 18 in. long billet aluminum Antirock Sway Bar Arms

Component Specs.:

Overall length = 18 in.
Thickness = 3/4 in. at the splines, 3/8 in. the balance of the length of the arm
Material = CNC machined billet 6061T6 aluminum
Logo = engraved
Spline count = 25
Center of splined hole to center of first (nearest) 1/2 in. hole = 12.195 in.
Center of splined hole to center of second 1/2 in. hole = 13.195 in.
Center of splined hole to center of third 1/2 in. hole = 14.195 in.
Center of splined hole to center of fourth 1/2 in. hole = 15.195 in.
Center of splined hole to center of fifth (farthest) 1/2 in. hole = 16.195 in.
Weight = 4 lbs. (for the pair)

Notes:

These arms are found in our CE-9900A TJ/LJ front Antirock Sway Bar Kits
Arms may be used in conjunction with our RJ-201000-101 Double Sheer End Link Bracket Kit. This bracket kit adds 1 1/2 in. in arm length and the ability to offset the end link up to 1 1/4 in.
See CE-99005A for sway bar arm hardware kit.
These arms should NOT be used with 1 in. diameter sway bars such as our RJ-204002-3 - 36 in. x 1 in. bar, or our CE-99001C - 40 in. x 1 in. bar.
All other 25 spline bars are applicable to these arms.

Fitment:

• 1997 Jeep Wrangler
• 1998 Jeep Wrangler
• 1999 Jeep Wrangler
• 2000 Jeep Wrangler
• 2001 Jeep Wrangler
• 2002 Jeep Wrangler
• 2003 Jeep Wrangler
• 2004 Jeep Wrangler
• 2005 Jeep Wrangler
• 2006 Jeep Wrangler

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov