Nilight Hitch Mount Flagpole Holder for 2-Inch Receiver (Universal; Some Adaptation May Be Required)

About this itemMultiple Functions: Mainly used for flag hitch mounts, stably holding and flying your proud flags while driving, in the parades. Can also be used to mount any other suitable size sticks with your wisdom, such as antenna, patio umbrella, etc for an easier life

Higher Compatibility: The flag holder is universally for a 2” hitch receiver. And suits a wide range of flagpole sizes, from 1” to 2.3” in diameter. Also, its bottom is designed to fully open to allow rest to ground and prevent water or dust from buildup

Adjustable Mounting: When sliding the flag holder to the hitch receiver, there are 3 hole positions to opt and adjust the remaining space for a possible spare tire or tailgate. The maximum space for a spare tire or tailgate is 13inch wide. You will need to measure your spare tire's thickness to confirm. Please note tailgate can only rest down halfway

Easy Installation: Just insert holder to hitch receiver, lock with hitch pin and clip; And then place pole into the holder, tighten up and fix the pole with the knob type screws; Note: Flange pipe sockets are optional to use when your pole is equal or less than 2”; Square wire lock pin is also optional for bottom close

Quality-built & All in a set: Made of heavy-duty steel and durable powder coating. And comes with all hardware for your possible needs. Includes 1 x flagpole holder, 2 x types mounting screws, 1 x hitch pin & hitch pin clip, 1 x square wire lock pin, and 2 x 2” flange pipe sockets

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov