J.E. Reel Heavy Duty 1350 CV Double Cardan Rear Driveshaft (20-24 3.0L EcoDiesel Jeep Gladiator JT w/ Automatic Transmission)

Heavy Duty 1350 Double Cardan Rear driveshaft for 4 door Jeep JT Gladiator 3.0L Diesel models with an automatic transmission. Replacement Driveline. This System is stronger than O.E. type applications recommended for stock to 6 1/2 inch lift.

J.E. Reel Drivelines are designed to work with 2 1/2 inch and 4 1/2 inch lifts from most lift manufacturers. Lifts higher than 4 1/2 inch or long arm lifts must be measured for driveline length. It is best to measure all drivelines if possible.

The purchaser shall be responsible to determine all design and/or specification parameters and the suitability of any particular product for its intended use.

Note: JT Gladiator2018 Powertrain is installed at 9.25 Degree. This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle. This model comes with CV and is suitable for lifts above 3 1/2 inch.

Details:

Collapsed Length 35.75 inch

Ride Height 28.5 inch

Extended Length 38.75 inch

U Joint Style 1350 W/O ZERK

Tube size 3.00X .083 Inch

Pinion/Yoke 3-4-3528R

T/C Yoke 3-1-32R

Kits Include:

Pinion Yoke

Transfer Case Yoke

Retaining Hardware

Fastners Included

Center Support Bearing Bracket

Fitment:

• 2021 Jeep Gladiator
• 2022 Jeep Gladiator
• 2023 Jeep Gladiator

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov