Conquer the Wilderness. If you're in the market for premium yet affordable lift kit for your Jeep Gladiator, this Fabtech Sport II Suspension Lift Kit is exactly what you're looking for. Offering a 3-Inch lift, this kit corrects your Gladiator's factory stance while providing even better off-road performance that the Gladiator is already well known for. The added ground clearance will stop you from bottoming out and damaging important underside driveline components when off-roading as well. It's worth noting that this lift kit is engineered to provide OEM comfort and compliance so as not to sacrifice any factory drivability.
Premium and Quality Coil Springs. The Sport II lift kit comes with front and rear dual rate coil springs. What makes these springs unique is their two-stage operating cycle. The initial stage of the spring cushions the ride but it can also extend if additional wheel travel if required. The second stage copes with the Jeep's weight and absorbs large impacts as they arise. This lift kit was engineered to have a dual purpose. It retains the factory Gladiator setup in terms of comfort and compliance, but adds an entirely new level of off-road capability on top.
Optimized Suspension Geometry. This kit also comes with extended front and rear sway bar links with urethane bushings. They work by re-positioning the bars, correcting for and offsetting the changed geometry caused by the added lift. The extended links prevent the sway bar from travelling over center, in turn preventing bind, especially at maximum extension travel. The bushing's urethane construction ensures component longevity and extreme durability even in the most challenging of environments. This kit retains the factory shocks with steel extensions brackets keeping the shocks in the proper travel range with the added 3 Inch lift.
Installation Process. Anyone with mechanical know-how and basic hand tools can install this kit in a couple of hours. The kit will clear 35 Inch tires with minor trimming of the stock fenders and 37 Inch tires with cutting of the high clearance fenders. You also get installation instructions provided with the kit.
Application. This Fabtech 3 Inch Sport II Suspension Lift Kit fits the 2020-2022 Jeep Gladiator JT 4WD.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov