Gear Specs. Alloy USA is at it again bringing you the 4.10 ring and pinion gear sets for your 2007-2018 Jeep Wrangler JK. These gears were made to give your Non-Rubicon JK more torque. By increasing the acceleration, your rig will easily be able to handle those larger tires you've been dreaming out getting. Constructed from 8620 high quality steel forgings, upgrading your gears at the same time as installing bigger tires will maintain your power and MPGs.

Quality Construction. Manufactured from forged 8620 steel to deliver a durable, high strength application, the Alloy USA Ring and Pinion Gears provide consistent installation and maintains a quiet operation. Protected by Alloy USA's exclusive 5-Year Warranty, you know you'll be receiving the ultimate in strength and quality.

Re-Gearing. When you increase the diameter of your tires, the engine has to work twice as hard to turn them. Naturally, that will lead to increased fuel consumption and reduced performance. Anytime you re-gear your rig, you can regain lost acceleration, performance and fuel economy.

Application. The Alloy USA Dana 30F/44R 4.10 Gears are designed to work on 2007-2018 Jeep Wrangler JK, excluding Rubicon models. Please choose from the options above to order the Dana 30 - Front Reverse Gears only, the Rear Dana 44 Gears only or both the Dana 30 - Front Reverse and Rear Dana 44 Gears as a set.

Application Note. The Dana 30 4.10 Gears will require the use of a 3.73 and numerically higher carrier or an aftermarket locker. Upgraded carrier is required as factory carrier is not compatible.

Fitment:

• 2007 Jeep Wrangler
• 2008 Jeep Wrangler
• 2009 Jeep Wrangler
• 2010 Jeep Wrangler
• 2011 Jeep Wrangler
• 2012 Jeep Wrangler
• 2013 Jeep Wrangler
• 2014 Jeep Wrangler
• 2015 Jeep Wrangler
• 2016 Jeep Wrangler
• 2017 Jeep Wrangler
• 2018 Jeep Wrangler

Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov