Talk to a Gladiator Sales Tech
1-877-870-8556
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Logo Image
$20K Sweeps! 10 Chances to Win! Enter Daily >

Dobinsons 3-Inch Rear Lift Coil Springs; 880-1210 lb. Load (20-23 Jeep Gladiator JT)

Item JG17407
ExtremeTerrain no longer carries the Dobinsons 3-Inch Rear Lift Coil Springs; 880-1210 lb. Load (20-23 Jeep Gladiator JT). Please check out 2020-2024 Jeep Gladiator Springs for an updated selection.
Verify parts fit and get product recommendations.
Gladiator Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Q&A, Specs & Installation

    Features

    • Provides Increased Ground Clearance
    • Three-Inch Rear Lift Coil Springs
    • Progressive with 880 Pound to 1,210 Pound Load
    • Hot-Wound Precision-Mandrel Bent Coil Springs
    • Powder-Coated in Black
    • Direct-Fit Installation
    • Backed by a Limited Lifetime Warranty
    • Sold in Pairs
    • Fits 2020-2023 Jeep Gladiator JT Models

    Description

    Lifted Setup. Reap the advantages of a lifted Jeep Gladiator with these Dobinsons 3-Inch Rear Lift Coil Springs with 880-1210 Pound Load. These progressive springs feature a heavy 880-pound to 1,210-pound load capacity and lift the rear by 3 inches. With this slight lift, you can get rid of the nose-down factory look for a more leveled and handsome stance.

    Advanced Coil Spring Technology. These Rear Lift Coil Springs are precision-engineered at Dobinsons to provide reliable support. Each coil is hot-wound, hardened, and tempered under strictly controlled parameters to prevent premature sagging and breaking. Computer-assisted premium mandrel bends are used to form the progressive rate coil springs. Moreover, the springs undergo load testing and scragging to ensure that they meet and exceed industry standards. Finally, they are powder-coated to protect against rust and corrosion.

    Progressive Rate Springs. Your Jeep Gladiator will benefit greatly from a progressive coil spring design as they allow for a comfortable ride over rougher trails and terrains. They provide more stable damping even when pushed hard during off-road applications.

    Installation May Require Expertise. Replacing your coil springs is not an installation task for beginners. You may need some spring compression tools to safely and successfully install these lift coil springs on your Jeep.

    Application. These Dobinsons 3-Inch Rear Lift Coil Springs with 880-1210 Pound Load will fit all 2020-2023 Jeep Gladiator JT models.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (2) Rear Lift Coils
    4.9

    Reviews of Dobinsons Suspension Products (13)

    Brand Image

    Reviews of Dobinsons Suspension products have an average rating of 4.9 out of 5

      Questions & Answers

      10 More Questions